Know More about Quenching and Tempering and Their Advantages
By megaturbo_urPublished On March 1, 2022
What is Quenching and Tempering?
Quenching and tempering are processes that strengthen and harden materials like steel and other iron-based alloys. The process of quenching or quench hardening involves heating the materials and then rapidly cooling it to set the components into places as quickly as possible. The process is tightly controlled, with the heating temperature, cooling method, cooling substance and cooling speed all dependent upon the type of material being quenched and the desired hardness. A typical heating range is between 815 and 900 degrees Celcius, with extra care being taken to keeping the temperature as stable as possible. Variances in the degree of heat is applied during the process can result in distortion in the resultant metal.
Likewise, the temperature of the cooling element needs to remain constant or the edges of the metal can wind up brittle. Different cooling elements have come into prominence over the years, naturally starting with water and moving onto mineral oils and even inert gases like nitrogen or helium.
After the material has been quenched to its hardest state, the process of tempering is used to achieve greater toughness and ductility by decreasing hardness. Tempering is achieved by heating the quenched material to below the critical point for a set period of time, then allowing it to cool in still air. Both the temperature and heating time depend on the composition of the material and will determine the amount of hardness removed.
What are the advantages of Quenching and Tempering?
By tempering quenched steel, it becomes less brittle and more ductile without sacrificing too much hardness. It is the combination of these two processes that produces harder, tougher steel that’s more weldable and ductile than ordinary carbon steel. While it takes longer to the manufacturer, the increased strength makes up for the delay. If the steel becomes too hard after quenching, it can be tempered. This involves heating the element again, but to a point far below the temperature reached in the quenching stage – usually around 540 degrees Celsius. The amount of time the quenched metal is tempered is the determining factor of how much hardness is removed.
The toughness-factor means greater resistance to wear and abrasion. That is why quenched and tempered steel is particularly useful in machinery and structures where greater abrasion resistance and higher yield strength are necessary, such as mining, quarrying, earthmoving, and construction.
As a leading manufacturer of TMT bar in Megaturbo offers the best TMT bars. We cover the entire North-Eastern states from Assam, Meghalaya, Arunachal Pradesh, Mizoram, Tripura, Manipur and Nagaland and we have our dominant presence in the major cities of these states i.e Guwahati, Jorhat, Golaghat, Sivasagar, Tinsukia, Dibrugarh, Itanagar, Shillong, Aizawl, Imphal, Agartala, Dimapur, Kohima. Contact us for Further Details. Contact us for further details.
